Key improvements in this release:

  • Fixed an issue with special characters in web configuration text fields.
  • Added support for EAP-TLS server certificate authentication.

Upgrade from PC:

  1. Download the firmware file here: 
  2. Connect the power adaptor to the Xcorder and turn the camera on.
  3. On the Xcorder menu, go to setup-> settings -> network settings-> WiFi driver settings, and select mode ad-hoc and save by pressing OK.
  4. Connect your pc to the wireless network called pixavi.
  5. Enter the address in the internet browser address field on your pc and press enter.
  6. Select login 2 times (no password is needed).
  7. Select the settings tab and then select upgrade.
  8. Click the browse button, and locate the file you downloaded in step 1.
  9. When clicking send, the firmware file will be transferred to the Xcorder and “software upgrade in progress” will appear on the Xcorder screen.
  10. Do not operate the Xcorder until the process is complete and the Xcorder reboots itself.


To verify the upgrade of the Xcorder, select setup > diagnostics and check that the firmware version has changed to


Upgrade from WiDRIVE1 (only available from FW and newer):