Description for programming the serial interfaces parameters of the the universal supply modules.


  • Universal supply module (Ex e): 
    Part numberEx-versionVersionDescription
    17-A1Z0-0018ATEX/IECEx Zone 1/21cordedUniversal supply module (Ex e)
    17-A1Z0-0019ATEX/IECEx Zone 1/21
    		BluetoothUniversal supply module (Ex e)
    B7-A2Z0-0042
    		ATEX/IECEx Zone 2/22
    		corded
    		Universal supply module (Ex e)
    B7-A2Z0-0043ATEX/IECEx Zone 2/22
    		Bluetooth
    		Universal supply module (Ex e)
    B7-A2Z0-004200US
    		NEC 500 Division  2corded
    		Universal supply module (Ex e)
    B7-A2Z0-004300US
    		NEC 500 Division  2
    		Bluetooth
    		Universal supply module (Ex e)
    • Only the baud rate can be programmed.
    • All other interface parameters are permanently programmed and cannot be changed.

  • Supply module Ex i:
    Part number
    		Ex-version
    		Version
    		Description
    17-A1Z0-0025
    		ATEX/IECEx Zone 1/21
    		cordedUniversal supply module (Ex i)
    17-A1Z0-0028ATEX/IECEx Zone 1/21
    		BluetoothUniversal supply module (Ex i)
    • All interface parameters are permanently programmed and cannot be changed.
    • The interface parameters of the connected system must be set to the same values.


Download - Description   
Content:

  • General information
  • Default parameters
  • Programming instruction  
  • Read out the Bluetooth MAC address (only relevant for the modules with Bluetooth)



References: