The following description is written for Android 10 on MC93ex-NI Mobile Computer.
The procedure can vary on other Android versions or devices.
The correct procedure is always described in the appropriate Product Reference Guide of Zebra.


The device display is able to detect touches using a finger, a conductive-tip stylus, or gloved finger.


Important note:
A glove can be made of medical latex, leather, cotton, or wool. For optimal performance use a
BARTEC certified and specified stylus.


1. Go to “Settings”2. Scroll down and select “Display”
3. Touch Display > “Advanced”4. Select “Touch panel mode”
5. Select the touch mode for your application.
  • Glove and Finger (Screen Protector off) to use a finger or a gloved finger on the screen without a screen protector.
  • Stylus and Finger (Screen Protector off) to use a finger or a stylus on the screen without a screen protector.
  • Finger Only to use a finger on the screen.
  • Glove and Finger (Screen Protector on) to use a finger or a gloved finger on the screen with a screen protector.
  • Stylus and Finger (Screen Protector on) to use a finger or a stylus on the screen with a screen protector.
  • Finger and Stylus to use a finger or a stylus on the screen.
  •  Finger and Glove to use a finger or a gloved finger on the screen.
Example for MC93ex-NI with Android 10 and Build number 10-16-10.00-QG-U00-STD-HEL-04
6. Leave menu with touch on “Home Menu”